Skip to Content

Hockey Rink Vs Soccer Field – Size Comparison Guide

Although they might seem to be very different sports, soccer and hockey actually have a lot in common. They’re both played on large fields, and the objective of the game is to get the ball or puck into the other team’s goal. They’re also both team sports.

However, there are a few differences when it comes to the size of a hockey rink compared to a soccer field.

Hockey Rink Vs Soccer Field - Size Comparison Guide

How big is a hockey rink?

According to the National Hockey League (rule book page 5) and the American Hockey League, a hockey rink of regulation size must be 200 feet long and 85 feet wide, with a goal area at each end.

This provides enough room for the six players on each team, which includes five players moving around the ice and one goalie for each side. There are four end zone face-off areas, positioned to the right and left ahead of each goal, and these areas, which are circular, have a diameter of 30 feet.

Each of the team’s end zones is 60 feet wide, and there is a 60-foot section in the middle of the rink that’s divided into two equal areas, each being 30 feet in length.

hockey rink dimensions

How big is a soccer field?

A soccer field must be between 110 and 120 yards long and 70 to 80 yards wide, according to FIFA. This is equal to between 330 and 360 feet long and between 210 and 240 feet wide.

This is much larger than a hockey rink, but that makes sense, as there are 11 active players for each soccer team when a game is being played, compared to hockey’s six players.

Each soccer field has a halfway line, located vertically at the halfway point of the field, and a center circle. The center circle has a diameter of 20 yards or 60 feet.

soccer field dimensions
soccer field/hockey rink

How big is a hockey goal?

The goals in a hockey rink are positioned 10 feet from each end wall, and the goal crease, where the goalie can move around, is 8 feet wide. The goal crease is shaped like a half-circle. The goal cage itself is 6 feet wide and 4 feet tall.

hockey goal dimensions

How big is a soccer goal?

A soccer goal is much larger than a hockey goal. The goal itself is 8 yards or 24 feet wide, 2.33 yards or 8 feet tall, and has a depth of 4 yards or 12 feet. The area surrounding the goal is 24 yards or 72 feet wide and has a depth of 12 yards or 36 feet.

soccer goal dimensions

How big is a hockey puck?

In a game of hockey, which is played on ice, neither the hands nor skates can be used to move the puck. Only the goalie can use his or her hands to catch the puck and stop it from reaching the goal.

See also  Baseball Card Size - Complete Guide

Instead, hockey sticks, which have large, flat wedges at their base, are used to maneuver the puck around the rink. For this reason, a hockey puck must be relatively small. Hockey pucks are shaped like a thick disk.

They are 1 inch thick and have a diameter of 3 inches. A hockey puck weighs between 5.5 and 6 ounces. This weight makes it light enough to slide easily across the ice or fly through the air, but it still gives it enough weight to travel long distances across the rink.

Hockey pucks are generally made of vulcanized rubber, which is durable and tough but gives the puck a smooth texture.

hockey puck dimensions

Hockey sticks don’t have a standard size, as they need to fit whoever using them, and that depends on the height of the player. However, the average hockey stick length for an adult is around 60 inches or 5 feet.

The maximum acceptable length for the NHL is 63 inches, but exceptions are sometimes made for very tall players.

How big is a soccer ball?

Similar to hockey, soccer players can’t use their hands to move the ball, unless they’re the goalie. Instead, the ball must be kicked or bounced off of other body parts.

Soccer balls are available in a few different sizes, including smaller sizes for children. However, a regulation soccer ball, also known as a Size 5 ball, must have a diameter of between 27 and 28 inches, and it should weigh between 14 and 16 ounces. The ball should be inflated with air until the pressure is between 8.7 and 16 psi. This helps to ensure that the ball isn’t too hard, but that it’s inflated enough that it has a bit of bounce, and it will travel a good distance when it’s kicked.

soccer ball diameter

Soccer balls have several layers to them. The bladder, which holds the air that helps the soccer ball keep its shape and gives the ball its spring, is usually made of either butyl or latex.

The inner lining is made of cotton, polyester, or a blend. The outer lining is generally PVC or polyurethane, although some leather balls are occasionally used.

The valve is also made of either butyl or silicone, and the stitching can be polyester or Kevlar. Some soccer balls use glue instead of stitching.

Sharing is caring!